Compact Monitors

Compact Setup Software for Configuration of  VIBROCONTROL 9xx & VIBROCONTROL 18xx


Version_Date: 2.34.10.0 (1/8/2019)
Language:  English & German
File type:   .ZIP (78 MB)


Requires Microsoft Windows 7 or later
This software package is included to all deliveries of VIBROCONTROL 9xx  and VIBROCONTROL 18xx monitoring units

  • with this download we provide the latest software version.
  • the .ZIP file includes the latest version of the instruction in English & German

 

Download the software


Compact  Analyzer Software for Trending & Vibration Analyzing  of measuring data from VIBROCONTROL 9xx & VIBROCONTROL 18xx 

Version_Date:  2.34.10.0 (1/8/2019)
Language:  English & German
File type:   .ZIP (59 MB)

Requires Microsoft Windows 7 or later
This software package is a freeware product provided by Brüel & Kjaer Vibro*

  • Compact Analyzer Software enables download of measuring data from VIBROCONTROL 9xx  and VIBROCONTROL 18xx monitoring units for trending and vibration analyzing
    • Overall values
    • Waveforms
    • process  Spectrum & Cepstrum
    • define marker for easy identification of vibration sources
  • with this download we provide the latest software version.
  • the .ZIP file includes the latest version of the instruction in English only 
     

Download the software

 

*Disclaimer for Compact Analyzer Software

Compass 6000

To use any of the sophisticated Compass 6000 Condition Monitoring Software suite functionality a dedicated license is required. There is no meaningful operation supported without that license. Because of this only important software patches - for the most recent versions of all components of the Compass 6000 software suite - are available for download here.

If you are interested in a Compass 6000 demonstration license or you require patch information regarding previous versions of the software, please contact your regional responsible sales representative or our Technical Support Team.

Compass 6000 Safety Monitoring Workstation Type 7126 Software Patch

Patch Version 49431 (02/04/2019)
Applicable to main MWS 7126 version: 3.6.49004 (REL19)
Language:  English & German
File format: .ZIP [2.7MB]

NOTE: Please close all active Compass 6000 MWS Type 7126 software session prior you install the patch. Consider storing all changes respectively finish your setup activities prior you close the application. The patch has been designed to be applied to the Compass 6000 MWS type 7126, MWS type 7123 and CMM type 3160.

Download the Software


Compass 6000 Monitoring Workstation Type 7123 Software Patch

Patch Version 49431 (02/04/2019)
Applicable to main MWS 7123 version: 3.6.49004 (REL19)
Language:  English & German
File format: .ZIP [2.7MB]

NOTE: Please close all active Compass 6000 MWS Type 7123 software session prior you install the patch. Consider storing all changes respectively finish your setup activities prior you close the application. The patch has been designed to be applied to the Compass 6000 MWS type 7126, MWS type 7123 and CMM type 3160.

Download the Software


Compass 6000 Condition Monitoring Module Type 3160 Software Patch

Patch Version 49431 (02/04/2019)
Applicable to main CMM 3160 version 3.6.49004 (REL19)
Language:  English & German
File format: .ZIP [2.7MB]

NOTE: Please stop the CMM service via the CMM Control Panel software application prior you install the Patch. After a successful patch installation restart again the CMM service via the CMM Control Panel software. During the time the CMM service is stopped, no Condition Monitoring data is collected. The Machine Protection System (VC-6000) is not affected by this and continues to operate without interruption. The patch has been designed to be applied to the Compass 6000 MWS type 7126, MWS type 7123 and CMM type 3160.

Download the Software


Compass 6000 Central Vibration Monitor Version 10 Software Patch

Patch Version 49215 (05/24/2019)
Applicable to main CVMv10 version: 10.1.49004 (REL19)
Language:  English & German
File format: .ZIP [0.5MB]

NOTE: Please stop the CVM server via the Compass Commander v10 software application prior you install the patch. After a successful patch installation restart the CVM server via the same Compass Commander v10 application. During the time the CVM server is stopped, no Condition Monitoring data is stored however the Compass 6000 CMM type 3160 server application can buffer data while the patch installation is running and until the CVM server has been restarted. The patch installation takes typically less than a minute.

Download the Software

ReX Software

Report & Examiner Software PREMIUM

Version download: 2.2.213 
Language: English
File type: .ZIP [77 MB]

We offer “ReX-PREMIUM” free of charge, without copy protection and it comes along with full unlimited functionality and use of time. The main reason for that offer is to offer ReX for two main functionalities which are not implemented in ReO v3:

  • Digital Signal Postprocessing DSP of raw vibration data in .wav format. Recorded either with VT-80/VP-80 Modules “Time Signal” or “Tracking”
  • For VT-80/VP-80 Module Acceptance test you will necessarily need ReX to draw on and configure predefined or personally defined measurement tasks (setups) which can be stored as Templates. 
     

Download the software

SETPOINT® Software

SETPOINT® Software 

SETPOINT® Setup & Maintenance Software is used for configuring the system and for performing routine maintenance such as firmware upgrades.  It is also able to emulate the front panel display.  Even without a rack connected, the software is useful to those considering the purchase of a SETPOINT® system that want to become better familiarized with its capabilities. The can experiment with the software to populate a rack with modules, configure channels and relay logic, and explore the system's rich signal processing and data acquisition capabilites.

SETPOINT® CMS Software is used when visualizing the condition monitoring data produced by our MPS hardware, whether stored in your OSIsoft PI System or inside our innovative flight recorder - a fully integrated, solid-state hard drive and/or removable SD Card embedded right in the MPS hardware. What's more, the viewer software is a free download - allowing anyone to open, view, and even save/export data from the SETPOINT® system. 

MPS Software

Version date: 6.0.3050 [5/25/2018]
MPS Release notes  [5/25/2018]
Language: English
File type: .ZIP [27MB]

  • Requires Microsoft .NET Framework 4.5.2 or later.  The web install version of .NET is included in our SETPOINT® Setup & Maintenance Software installer package.  The installer will first check to see if .NET is already installed on the computer, and if not, download it from the Microsoft website and install it before the Setup & Maintenance Software installation process proceeds. The computer must be connected to the internet during the installation process unless .NET is already present on it. If this is not possible, download the offline install version of .NET from the Microsoft website. This will allow .NET to be installed on computers without an internet connection. Then, install SETPOINT® Setup & Maintenance Software on the computer(s). The install package will automatically detect that .NET is already installed, and the rest of the Setup & Maintenance installation will continue normally.  
  • This download installs three separate applications known collectively as SETPOINT® Setup & Maintenance Software.  It consists of the following: 
  1. SETPOINT® Rack Setup - used to configure a SETPOINT® rack
  2. SETPOINT® Rack Maintenance - used to upgrade firmware, perform rack diagnostics, and other rack maintenance tasks
  3. Simulator Launcher - used to emulate the touchscreen display when a physical rack is not connected; primarily intended for demonstration and training purposes
  • Refer to the MPS Operation & Maintenance Manual for additional details on installing and using SETPOINT® Setup & Maintenance Software. You can also contact our Technical Support Team for assistance.

NOTE: The differences between the web install and offline install versions are detailed on the Microsoft page accessed via the link above. 

Download the Software

CMS Display Software

Version date: 6.10.793  [04/01/2019]
CMS Release notes [04/01/2019]
Language: English
File type: .ZIP [30MB]

  • This download is for CMS Display software.  CMS Display can be used to connect to a PI Server where SETPOINT® vibration data is stored. It can also be used to open and view an archive file (.CMS file extension). To open an archive file, no additional software is required. To connect to a PI Server, additional OSIsoft PI System components must be installed (see below).
  • Connection to a PI Server hosting CMS data requires that the computer running CMS Display also has OSIsoft's PI AF Client (version 2014 or later) installed.  The installation process for CMS Display will automatically detect the presence of PI AF Client.  If present, the user will be able to connect to a PI Server.  If not present, the user will only be able to open and view CMS data archives (.CMS file format).  PI AF Client is not available for download from this website.  You must obtain it directly from OSIsoft.  Alternatively, you may contact  SETPOINT® Technical Support to obtain the installation file and corresponding instructions.
  • Data accessible by CMS Display software is stored in the OSIsoft PI System.  PI Server, PI AF Server, and additional OSIsoft components used in the PI System are supplied separately and not downloadable via this website.  For assistance, contact our Technical Support Team.
  • Refer to the CMS Operation & Maintenance Manual for additional information on installing and using the software.


Download the software


Version date: 6.10.794  [04/01/2019]
Language: Russian
File type: .ZIP [30MB]

  • This is a Russian-language version of our current production-released (6.10.794) English-language CMS Display software.

Download the Software


SETPOINT®-to-PI Adapter Software

Version date: 6.10.794 [04/01/2019]
Language:English
File type:.ZIP [8MB]

  • This application enables communications between one or more SETPOINT® racks and a PI Server. The computer running this adapter is normally a PI Server but the software may alternatively reside on a separate computer in the PI Server's network. 
  • The computer running SETPOINT®-to-PI Adapter must also have OSIsoft's PI AF Client (version 2014 or later) installed.  The installation process will automatically detect the presence of PI AF Client and prompt the user accordingly.  PI AF Client is not available for download from this website.  You must obtain it directly from OSIsoft.  Alternatively, you may contact SETPOINT® Technical Supportto obtain the installation file and corresponding instructions.  
  • PI Server, PI AF Server, Microsoft SQL, and additional OSIsoft components used in the PI System are supplied separately and not downloadable via this website.  For assistance, contact our SETPOINT® Technical Support Team.
  • Refer to CMS Operation & Maintenance Manual for additional details.  You may also contact our Technical Support Team.


Download the software

 

Version date: 6.10.794  [04/01/2019]
Language:Russian
File type:.ZIP [8MB]

  • This is a Russian-language version of our current production-released (6.10.794) English-language SETPOINT®-to-PI Adapter software.

Download the software
 

SETPOINT® Firmware 

Firmware is used in the SETPOINT® rack's UMM, TMM, and SAM modules.  It is also used with the touchscreen display. However, there is no need to download firmware separately from our configuration software - the two are bundled together. Simply download our SETPOINT® Setup & Maintenance Software*. When you connect to a SETPOINT® rack, the software will automatically detect the current revision of firmware in all modules and display any applicable newer revisions, allowing you to selectively upgrade. 

Contact us for details about Firmware

Get Support

We’re reachable 16 hours each day via phone using the numbers below, or you can email us.  Our average email response time is within one business day.

Technical Support 

Hotline for support: 

 +49 6151 428 1400

Technical support

Hotline for Calibration & repairs: 

  1.  +49 6151 428 1327 
  2.  +49 6151 428 1328 

Repairs & Calibration

 

Darmstadt, Germany
Main switchboard: 
+49 (0) 6151 428 0
E-Mail: support@bkvibro.com

Nærum, Denmark
Main switchboard: +45 77 41 25 00

Minden, Nevada
Main switchboard: +1 (775) 552 3110
Email: techsupport@setpointvibration.com