The wind turbine virtual site survey is a very important function for retrofitting turbines with a condition monitoring system. The monitoring system specialist normally spends a couple of hours in the nacelle to determine where and how sensors are to be mounted on the drive train and tower. This task is absolutely critical for successful [...]
EXPERT CONDITION MONITORING OF WIND TURBINES Benefits of Condition Monitoring for wind turbines Driven by value added to assets, not alarms No. of WTG monitoring systems hits 30k mark – Maintenance expenses can reach up to 20-25% of the total levelized cost per kWh produced over the lifetime of the wind turbine.1 This large expense […]
Problem To save costs respectively increase the production volume of molds, the manufacturing time needed to be reduced. This could be achieved for example by milling at a higher speed as well as by increasing the feed motion of all milling machine axes in the x-y-z directions. Accordingly, the unbalance force (due to the higher […]
The Big Five Five technology trends in the machine condition monitoring system development arena Michael Hastings, Denmark, and Steve Sabin, USA, Brüel & Kjær Vibro, describe five technology trends in the machine condition monitoring system development arena that together provide an optimal fertilizer plant condition monitoring solution. Read the article
Webinar Thursday, Sep 27, 2018 4:00 PM – 4:45 PM CEST Join us for a free webinar about Machine learning for condition monitoring for energy, utilities, and manufacturing Machine learning for condition monitoring for energy, utilities, and manufacturing Over the past 10 years, Bruel & Kjær Vibro has monitored over more than 10,000 wind turbines. […]
20,000th wind turbine monitoring system sold by Brüel & Kjær Vibro A recent order from a North American customer brings the total of wind turbine monitoring systems sold by Brüel & Kjær Vibro (B&K Vibro) to more than 20,000 worldwide. The milestone is also a bellwether for the industry, signifying the growth in wind turbine […]
New data acquisition capability successfully applied at a wind farm in Spain! Shortly after the release of their new data acquisition unit DDAU3, the system has already been installed on wind turbines in Spain and is currently sending data to our Surveillance and Diagnostic Center in Denmark for evaluation. B&K Vibro technology – expertise and […]
Become a vibration analyst now! Our training offering in vibration measurement and condition monitoring has been extended: In partnership with the Mobius Institute we now provide the ISO certified CAT I–III training courses to our customers. Your trainers are diagnostic specialists with long-standing experience in vibration monitoring and analysis and CAT IV instructors certified by […]
Brüel & Kjær Vibro’s wind turbine monitoring system has just been successfully upgraded to fulfill the rigorous requirements of the North American Electric Reliability Corporation (NERC) for cybersecurity of the North American electric utilities. This means Brüel & Kjær Vibro’s wind turbine monitoring solution, consisting of the DDAU data acquisition unit and the VibroSuite monitoring […]
Innovations Series B&K Vibro featured on Discovery Channel’s ‘Innovations’ episode with Ed Begley, Jr. Discovery Channel recently aired another episode of their ‘Innovations’ series with Ed Begley, Jr. which featured B&K Vibro! It was originally broadcasted on Thursday, November 17, 2016 at 7:30am (EST). Watch the complete episode here! Starting at minute 21:05, this episode gives viewers […]
JOIN OUR EMAIL LIST TO RECEIVE REGULAR UPDATES AND OUR MONTHLY NEWSLETTER
JOIN OUR EMAIL LIST TO RECEIVE REGULAR UPDATES AND OUR MONTHLY NEWSLETTER
Brüel & Kjær Vibro
BK Vibro America Inc.
1100 Mark Circle
Gardnerville NV 89410
Phone: +1 (775) 552 3110
For Support, require a quotation or further information please submit the form below and we will respond back within 24 hours
For Support, require a quotation or further information please submit the form below and we will respond back within 24 hours
